5 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. Series 6100 Standard strokes 12 16 20 25 32 40 50 63 B = Control unit with bronze bush C = Control unit with bearing bush 6100.Ø.stroke. _ . _ Construction characteristics Technical characteristics Ordering code Body Guide rods Piston Piston rod Rods bushing End plate Piston seal Piston rod seal Wipers Plate anodised aluminium C43 chromed steel (control unit with bronze bush) tempered and chromed steel (control unit with bearing bush) aluminium stainless steel (for bores Ø12, Ø16, Ø20, Ø25) C43 chromed steel (for bores Ø32, Ø40, Ø50, Ø63) bronze or bearing bushing anodised aluminium oil resistant NBR rubber PUR (NBR 12-16) PUR nickel plated steel Function Fluid Working pressure Working temperature Cushioning double acting filtered and preferably lubricated air or not (If lubricated the lubrication must be continuous) max. 10 bar -5°C - +70°C elastic bumper on both ends Intermediate strokes can be obtained using spacers with defined length (5, 10, 15, 20 mm). Example: It is possible to obtain a 6100.32.45.B cylinder from a 6100.32.50.B cylinder by inserting a spacer with length of 5 mm. The intermediate strokes manufactured without the use of spacers are considered special executions. Bore 10 25 30 40 50 75 100 125 150 175 200 Ø12 Ø16 Ø32 Ø40 Ø50 Ø63 Stroke Side supply ports closed L = Top supply ports closed Ø20 Ø25 20 Guided compact cylinder Ordering code, technical data 5.5