4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. Series 1400 Hydraulic speed control cylinders Ø40 - Ø63 Technical characteristics Max connecting load Min. and max. speed Working temperature Minimum pressure for the actuation of skip and stop valves Construction characteristics Standard strokes 50 - 100 - 150 - 200 - 250 - 300 - 350 - 400 - 450 - 500mm minimumstroke for type 1400.stroke.03.05 and 1400.stroke.03.06, 150mm. black anodised aluminium bright painted drawn steel C43 chromed steel plated zinc steel aluminium NBR rubber FPM PUR brass black anodised aluminium hydraulic with viscosity 2.9° E at 50°C (viscosity index minimum 118) 40 mm and 63 mm diameter 600 kg (Ø40) -1200 Kg (Ø63) 60 - 10000 mm/min. -5°C - +70°C "Attention: Dry air must be used for application below 0°C" General The SKIP and STOP valves are pneumatically actuated 2 ways poppet valves. The SKIP valve (accelerating device) is normally open and is equippedwith a supplementary regulator for maximumspeed control. It must be activated to obtain speed regulation. The STOP valve can be normally closed or normally open. Covers Barrels Rod Tie rods Piston Waterproof seals Piston seal Rod seal Regulators group Skip and stop valves Circuit oil Bore Important: For heavier loadwe have available the hydraulic speed control check cylinders of 63mmdiameter suitable towithstand loads up to 1200 kg. For more information please contact our technical department. 4 bar 4.103