GENERAL CATALOGUE

Series 1200 Microcylinders according to standard ISO 6432 Technopolymer “TECNO-MIR” Standard strokes ø 12 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 mm ø 16 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 mm ø 20 - ø 25 15 - 25 - 50 - 75 - 80 - 100 - 125 - 150 - 160 - 200 - 250 - 300 mm Construction characteristic Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO Vg32) for correct continued lubrication. Our Technical Department will be glad to help. 4.14 Fluid Maximum working pressure Working temperature filtered air and preferably lubricated 8 bar -5°C - +50°C End covers Barrel Piston rod Piston Seal Piston rod seal Mounting Forks nylon 66 reinforced with glass fibres nylon 66 reinforced with glass fibres C43 Chromed (non magnetic piston version) stainless steel (magnetic piston version) aluminium NBR oil-resistant rubber seal PUR steel painted / stainless steel AISI 304 zinc plated steel / stainless steel AISI 304 Technical characteristics Ø 12 Ø 16 Ø 20 Ø 25 Thread 1 1 4 4 Bore M5 M5 G 1/8” G 1/8” Maximum torque (Nm) Maximum tightening torque for fittings Ø12 Ø16 Ø20 Ø25 stroke 0 60 gr. 75 gr. 180 gr. 200 gr. every 10mm 7 gr. 8,5 gr. 10 gr. 20 gr. WEIGHT TABLE SERIES TECNO MIR 1232 WEIGHT gr. Ø12 Ø16 Ø20 Ø25 stroke 0 50 gr. 65 gr. 120 gr. 160 gr. every 10mm 3,75 gr. 4 gr. 6,5 gr. 9 gr. WEIGHT TABLE SERIES TECNO MIR 1230 - 1231 WEIGHT gr. Bore Bore 4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice.

RkJQdWJsaXNoZXIy NzYzOTY1