1 Series 1750-60 Miniaturised pressure regulators 1.114 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. This new type of miniaturised pressure regulators are mostly indicated for the use on the secondary level of the pneumatic circuits. Thanks to the contained dimensions are particularly indicated to be used very closely or directly mounted onto the consumption. Three versions are available. General Version rod G 1/8" swivel ring with female thread G 1/8" and G 1/4" or push-in fitting for tube Ø4, Ø6 and Ø8 model with body in technopolymer integrated gauge and quick coupling fittings for tube Ø4 and Ø6. G/1/8” model to be directly mounted onto the valve Compact design to be directly mounted onto the valves uses standard swivel rings with G 1/8” female thread (ref 41218) or quick coupling fittings for tube sizes. It is also possible to supply the regulating shaft without the swivel ring. Model with body in technopolymer and integrated gauge is themore complete solution, comprises a movable gauge which enables to check the regulated pressure Is manufactured using the same regulating unit as the base model fitted into a technopolymer body on which are inserted two quick coupling cartridges , 4mm or 6mm tube for inlet and outlet connections; two side plates lock the cartridges and gauge in position. It is possible to join together more than one regulator by means of a dedicated adaptor made of technopolymer which must be inserted in the appropriate slot. ( the air must be supplied independently to each regulator.) Several mounting solutions are available: wall mounting via two mounting holes, on DIN rail using the specific accessories or on panels. Several mounting solution are available: Mounting solutions Model with body in technopolymer and integrated gauge: Wall mounting via the mounting holes on the body Model with body in technopolymer and integrated gauge: Panel mounting via the locking nut Model with body in technopolymer and integrated gauge: On DIN rail using the specific accessories G/1/8” model to be directly mounted onto the valve: Directly mounted onto the valves threaded connections (consumptions) M odel with body in technopolymer and integrated gauge: In batteries using the appropriate “X” shaped connecting insert.