5 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. Ordering code Construction characteristics anodised aluminium steel NBR vulcanized NBR rubber on steel core elastic bumper; hydraulic dampers from size Ø50 - Ø100 versions R or T Body Rod Seals Vane Cushoning Technical characteristics Fluid Working pressure Temperature Rotation range Max. allowed leak Filtered air and preferably lubricated 1,5 - 7 bar 0°C - 50°C 90° - 180° - 270° Ø10 - Ø40 = 0,3 Nl/min / Ø50 - Ø100 = 0,5 Nl/min 6420.Ø._._ Size Ø10 Ø15 Ø20 Ø30 Ø40 Ø50 Ø63 Ø80 Ø100 Rotation angle 90 = 90° 180 = 180° 270 = 270° Version / = Without adjustable rotation angle, and without sensor support R = With adjustable rotation angle S = With sensor supports T = With adjustable rotation angle and sensor supports General The vane type rotary actuators, 6420 series is designed to operate at 90-180 or 270 deg. In a contained space. Dimensionally aremore compact than other types of rotary actuators. The range includes bore sizes from10 to 100 in 4 configurations: - Basic. - With rotary angle adjustment mechanism. - With sensing support. - With rotary angle adjustment mechanismand sensing support. The bodies are in aluminium , the shafts in chrome plated steel and the seals in NBR. The sensing support kit enables for the sensors to be positioned in any position. The rotary angle adjustment mechanism enables the adjustment of the complete rotation on bore sizes 10 to 40 while on the others sizes carries as standard hydraulic dampers which enable the adjustment only of the last part of the rotation. The units can be fixed using the thread on the body or the through holes on the body. On bore sizes 50 to 100 the shaft runs into ball bearings which ensure high resistence.o rotante è guidato su cuscinetti a sfere che assorbono i carichi radiali e assiali, garantendo durata e affidabilità. Vane type rotary actuators Ordering code and technical data Series 6420 5.57