Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 3 | 70 Series 1300 - Fixing devices Pneumatic actuation 3 ►Intermediate trunnion (Aluminium with steel bushes) Coding: 1320.Ø.12BF Ø BORE 32 = Ø32 40 = Ø40 50 = Ø50 63 = Ø63 80 = Ø80 100 = Ø100 Aluminium Intermediate Trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the Trunnion to the extruded barrel In the case of heavy duty applications it is recommended that the Trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Attention: mounting of the clevis with contact to the end caps does not allow the use of the magnetic sensors as the switch limits. TK TL TM TL ØTD XV (max) + stroke XV (min) UW Bore 32 40 50 63 80 100 TD Ø12 Ø16 Ø16 Ø20 Ø20 Ø25 TL 12 16 16 20 20 25 TM 50 63 75 90 110 132 TK 18 21 21 27 27 32 UW 54 60 72 87 109 130 XV min. 61 69 78 86 96.5 108.5 XV max. 85 96 102 109 123.5 131.5 Weight (g) 70 110 140 280 370 630 ►Intermediate trunnion (Aluminium with steel bushes) Coding: 1390.Ø.12F Ø BORE 32 = Ø32 40 = Ø40 50 = Ø50 63 = Ø63 80 = Ø80 100 = Ø100 Aluminium Intermediate Trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the Trunnion to the extruded barrel In the case of heavy duty applications it is recommended that the Trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Attention: If the Trunnion is mounted in direct contact with the cylinder end cap, it will not be possible to fit magnetic sensors at the end of stroke 1500._, RS._, HS._ series. TK UW ØTD TL TM TL XV (max) + stroke XV (min) Bore 32 40 50 63 80 100 TD Ø12 Ø16 Ø16 Ø20 Ø20 Ø25 TL 12 16 16 20 20 25 TM 53* 63 75 90 110 132 TK 18 21 21 27 27 32 UW 56 64 76 92 112 134 XV min. 65 74 80 87 99 109 XV max. 81 91 100 108 121 130.5 Weight (g) 60 100 125 240 320 540 * Ø32, TM: not according to standard ISO 15552
RkJQdWJsaXNoZXIy NzYzOTY1