Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice ISO 6432 Microbore cylinders Series 1200, Threaded end covers Pneumatic actuation 3 3 | 2 ►Basic version Coding: 12T.Ø.stroke.VG T TYPE 60 = Double acting version 71 = front spring from Ø12 (max stroke 40 mm) 72 = rear spring from Ø12 (max stroke 40 mm) Ø BORE 8 = Ø8 10 = Ø10 ... 50 = Ø50 V VERSION A = Adjustable cushioning (from Ø16) M = Magnetic piston (from Ø10) X = Stainless steel rod MA = Cushioning with magnetic piston MAX = Cushioning, magnetic piston and stainless steel piston rod G SEALS = NBR T = HNBR V = FPM L10+stroke L5+stroke XC+stroke L1+stroke Standard execution, fully complying with ISO standards from ø8 to ø25. Bores 32, 40 and 50 not included in the standard, comply with our own specifications. Can use all available mountings. For single acting type, the maximum stroke is 40 mm., after which overall dimensions increase in length to an extent not proportional to the stroke (and in any case not longer than stroke 100). ►Without rear eye version Coding: 12T.Ø.stroke.VG T TYPE 61 = Double acting version 73 = front spring from Ø12 (max stroke 40 mm) 74 = rear spring from Ø12 (max stroke 40 mm) Ø BORE 8 = Ø8 10 = Ø10 ... 50 = Ø50 V VERSION A = Adjustable cushioning (from Ø16) E = version with non-rotating hexagonal rod, non magnetic piston (from Ø12) M = Magnetic piston (from Ø10) X = Stainless steel rod AE = version with non-rotating hexagonal rod, with cushioning (from Ø16) MA = Cushioning with magnetic piston ME = version with non-rotating hexagonal rod, magnetic piston (from Ø12) MAE = version with non-rotating hexagonal rod, with cushioning and magnetic piston (from Ø16) MAX = Cushioning, magnetic piston and stainless steel piston rod L = Air inlet at 90° version G SEALS = NBR T = HNBR V = FPM D EE Y KW KV KY KX WF AM L6+stroke L4 L7 EE L8+stroke L3 L4 KK MM BE L11 EE Version derived from standard execution 1260 and not included in ISO standard. Not having a rear eye it is shorter and the air inlet is from the rear or at 90° like it is on the front. The considerations made for the basic type 1260 apply for all single-acting types. ►Through rod cylinder version Coding: 1262.Ø.stroke.VG Ø BORE 8 = Ø8 10 = Ø10 ... 50 = Ø50 V VERSION A = Adjustable cushioning (from Ø16) E = version with non-rotating hexagonal rod, non magnetic piston (from Ø12) M = Magnetic piston (from Ø10) X = Stainless steel rod AE = version with non-rotating hexagonal rod, with cushioning (from Ø16) MA = Cushioning with magnetic piston ME = version with non-rotating hexagonal rod, magnetic piston (from Ø12) MAE = version with non-rotating hexagonal rod, with cushioning and magnetic piston (from Ø16) MAX = Cushioning, magnetic piston and stainless steel piston rod G SEALS = NBR T = HNBR* V = FPM* *Excludes hexagonal rod version L10+stroke L5+stroke L9+2 stroke WF+stroke Execution by rod coming out from both end caps, with overall dimensions. except for the rod, equal to 1260 version. Not available with Ø8 and 10.
RkJQdWJsaXNoZXIy NzYzOTY1