Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Air service units Series Airplus 2 Air treatment 2 | 10 ►Coalescing filters (DA) ►Coalescing filter ►Available in 4 sizes with flow rates up to 8000 Nl/min and connections from 1/8” to 1” ►Available with a filtration grade of either 0.01 μm or 1 μm ►Filtering performance ranges from 95% to 99,97% (depending on the filtration grade) ►Bowl assembly via bayonet type quick coupling mechanism with safety button ►Semi-automatic or automatic drain ►Atex certification (II 2GD or II 3GD) ►Inlet pressures up to 20 bar Note In order to ensure the high level of filtration, it is recommended that a 5μ filter is installed before the coalescing filter. In order to ensure that any fluid discharged by the auto drain assembly is adequately drained away, it is recommended you use a 6mm fitting and tube 1 2 1 2 Technical characteristics Size Size 1 Size 2 Size 3 Size 4 Body and connections type Technopolymer body, integrated technopolymer connections (T version) / Technopolymer body, metal connections (N version) / Aluminium body, integrated aluminium connections (P - L versions) Protection and bowl type Technopolymer protection - PA bowl Technopolymer protection - PC bowl / Metal protection - PA bowl Metal protection - PC bowl Metal bowl (blind metal bowl) IN / OUT connections T version G1/4” G3/8” G1/2” not available N version G1/8” - G1/4” - 1/4 NPT G3/8” - G1/4” - 3/8 NPT G3/8” - G1/2” - 1/2 NPT P and L versions not available G3/8” G1/2” G1” Assembly configuration Stand alone / Panel mounted Assembly positions Vertical ±5° Bowl capacity 18 cm3 34 cm3 68 cm3 90 cm3 Condensation drain Semi-automatic Automatic Max. fittings torque IN / OUT connections G1” metal / / 35 Nm G1/2” metal 30 Nm / G1/4” metal 20 Nm / G1/8” metal 15 Nm / G3/8” metal / 25 Nm G1/2” technopolymer / 22 Nm G1/4” technopolymer 9 Nm / G3/8” technopolymer / 16 Nm Operational characteristics Size Size 1 Size 2 Size 3 Size 4 Size 1 Size 2 Size 3 Size 4 Condensation drain Semi-automatic Automatic Maximum working pressure 13 bar 10 bar / 20 bar (only with body and metal bowl) / 16 bar (only with body and metal bowl) Minimum working pressure 0,5 bar Working temperature -5°C...+50°C -5°C...+50°C / -30 °C ... +80 °C (only for P version and metal bowl) -40 °C ... +80 °C (only for L version and metal bowl) Filter pore size Filtering performances (μm) Residual oil (ppm) ISO class for oil Retained particles (μm) ISO class for solid particles Cartridge 0,01 μm 99,97% 0.01 1 0.01 < 1 1 μm 95% 0.8 < 3 1 2 Weights Size Size 1 Size 2 Size 3 Size 4 Fully technopolymer version 130 g 224 g 366 g / Technopolymer body version, aluminium bowl protection and technopolymer bowl / 251 g 402 g / Technopolymer body version, aluminium bowl / 293 g 475 g / Aluminium body version, technopolymer protection and bowl / 309 g 493 g 1197 g Aluminium body version, aluminium bowl protection and technopolymer bow / 337 g 529 g 1340 g Aluminium body version and aluminium bowl / 378 g 603 g 1365 g
RkJQdWJsaXNoZXIy NzYzOTY1