Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 Air distribution Solenoid valves manifold 1 | 439 Series 2500 Optyma-F EVO - Configurator Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Module 1 ...-... Module 2 ...-... Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Repeating numbers of the module _ Indicate the number of repeats of the same module (no value for a single module) Module n ...-... Right endplates U0 Endplates closed Accessory diaphragm plug (Optional) X Diaphragm plug on port 1 Y Diaphragm plug on port 3 Z Diaphragm plug on port 5 Accessory diaphragm plug (Optional) X Diaphragm plug on port 1 Y Diaphragm plug on port 3 Z Diaphragm plug on port 5 Electronic components ...-... Left endplates A Self feeding E External feeding - - - - - - - CONFIGURATION CODE U0 FE ( ) ( ) ( ) Note: • 32 if a 37-pole multi-pin module, a serial node or IO-Link interface are used. • 24 if a 25-pole multi-pin module is used. If a monostable valve is used on a bistable type base (2 electrical signals occupied), an electrical signal is lost. However, this makes it possible to replace the monostable valve with a bistable valve in the same position. Diaphragm plugs are used to interrupt ports 1, 3 and 5 of the sub-base. If it is necessary to interrupt more than one port at the same time, put the letters that identify their position in sequence (e.g.: if it is necessary to intercept the ports 3 and 5 you must put the letters YZ). If one or more ports must be interrupted more than once, the addition of the intermediate supply/discharge module is necessary.
RkJQdWJsaXNoZXIy NzYzOTY1