GENERAL CATALOGUE

4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. General Profiled tube has two "T" slots on the three sides hosting sensors 1580._, MRS._, MHS._. without adaptors. Bore Tolerance Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod; •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device and aluminium piston); •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO VG32) for correct continued lubrication. Our Technical Department will be glad to help. Series 1386 - 1388 / 1396 - 1398 from 0 to 150, every 25 mm from 150 to 500, every 50 mm from 500 to 1000, every 100 Stroke up to 500 over 500 up to 1000 up to 500 over 500 up to 1000 +2 0 +3.2 0 +2.5 0 +4 0 32 - 40 - 50 63 - 80 - 100 Standard strokes (for all diameters) Stroke tolerance (ISO 15552) Cylinders according to standard ISO 15552 ECOPLUS Construction characteristics Series 1386 - 1388: high resistant thermoplastic material C43 chromed steel or stainless steel anodised aluminium alloy self-lubricating sintered bronze acetal resin, aluminium on request standard: NBR Oil resistant rubber, PUR Piston rod seals (PUR seals available upon request) brass Rod Barrel Rod-guide bushing Piston Seal Cushion adjusting screws Technical characteristics Series 1396 - 1398: Die-casting aluminium End plates Ø 32 - 40 - 50 - 63 - 80 - 100 mm 27 - 31 - 31 - 37 - 40 - 44 Fluid Max. pressure Operating temperature -5°C - +70°C with standard seals -30°C - +80°C with PUR seals mm 20 - 20 - 22 - 22 - 32 - 32 filtered and preferably lubricated air or not (If lubricated the lubrication must be continuous) 10 bar Bore Cushioning lenght Cushioning lenght "K" and "PK" version 4.59

RkJQdWJsaXNoZXIy MjczMDU=