GENERAL CATALOGUE

4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice. 32 0.9 8 60° 40 1.7 10 60° 50 2.9 10 50° 63 5.55 12 50° 80 13.2 18 40° 100 23.8 22 40° Bore Torque moments Nm/bar Axis load max. kg. Cushioning angle Series 1330 - 1333 Rotary actuators UNI 5079 aluminium alloy casting oxidised aluminium 18 NiCrMo4 cemented and tempered C43 anodised aluminium Ra=0.3-0.5 acetal resin hardened aluminium NBR 80 shore rubber nickel plated steel nickel plated brass Construction characteristics Cover plates Central body Pinion Rack Barrel Sliding shoe Cushion bushings Piston Seals Cushion adjustment screw Rotating angle adjustment assy vulcanized rubber block on steel core with incorporated permanent magnet or without magnet plus rear spacer for non magnetic version Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Use hydraulic oils H class (ISO Vg32) for correct continued lubrication. Our Technical Department will be glad to help. Fluid Max. pressure Working temperature Standard rotation Rotating angle adjustment assy filtered and preferably lubricated air 10 bar -5°C- +70°C 90° - 180° - 270° - 360°(+1°) ±10° Technical characteristics 4.55

RkJQdWJsaXNoZXIy MjczMDU=